Categories
Industry

Bacterial filtration efficiency test wholesale with GesterInstruments

Best splash resistance tester manufacturer? GESTER is professionally engaged in manufacture and R&D of Textile Testing Equipment with 20+ years experience, including Fabrics tests, Yarn& Fibre tests, Color fastness tests, Flammability tests etc. Various in styles, GESTER instruments’s textile testing equipment can meet the needs of different customers.GESTER insists on the use of high-quality materials and advanced technology to manufacture textile testing instruments. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.GESTER serves every customer with the standards of high efficiency, good quality, and rapid response. Find even more info on splash resistance tester.

The AC servo drive system with low noise and wide range of applications. Pneumatic Bursting Strength Tester Test Methods: Constant Time Bursting. The tester bring saving and printing functions and support on-line operation. Provide on-line interfaces, professional detection software which can be used to analysis testing result. Summary of Test Method: A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength.

Correct use of computerized universal testing machine: When the electronic stepless speed regulation adjusts the lifting speed, it cannot be operated too fast. Before using the 50KN power machine, pay attention to check the tightening of the clamp tightening screws. When lifting the lower clamp, the movement should be stable, avoid collision, and often check the tightness of the clamp screw. When replacing the test fixture, pay attention to cooperate to prevent bruises.

ASTM D4060 Taber Abrasion Tester Uses and Factors to Be Considered: Taber Abrasion is used for measuring the wear resistance of organic coatings applied flat, rigid test samples. ASTM D1044 is used for transparent plastic materials to evaluate their capacity to maintain their optical properties, upon typical, wear to be expected while in service. Abrasion resistance to Taber Abrasion is usually measured as a weight or a coating thickness loss after a given number of cycles. Each arm, by default, is loaded to apply a 250 g. pressure on each wheel. Depending on the product/specification used, this weight can be increased to 500g or 1000g. The abrading wheels are available in different grit for a more or less abrasive action.

Reagent Preparation: Prepare corresponding reagents according to different test standards and keep them as standby. If sodium perborate is required in the test, the preheating temperature shall not exceed 60℃ when preparing the solution, and it shall be used within 30 minutes at most to prevent the loss of oxidant. Solution Warm-up: Put the specified volume of solution and a specified number of steel balls into the stainless steel cup, put the stainless steel cup into the launderometer for a few minutes, preheat to the specified temperature. Then put in the prepared sample for test. Read additional details at https://www.gesterinstruments.com/.

Categories
Industry

Level gauge supplier from China

Level gauge wholesale from China? In the measurement circuit of the radar level gauge, when there is additional DC current and voltage, it is DC interference. In severe cases, the measuring instrument will not work properly. The sources of DC interference are as follows: AC interference can be divided into line-to-line interference and ground interference. Inter-line interference refers to the AC voltage between the output ends of the radar level gauge (compensation line) under external influence. This interference is also known as lateral, common mode or common mode interference. Generally speaking, the line-to-line interference voltage can reach several millivolts or even tens of millivolts. Find even more info on level switch manufacturer. OEM Service-can be customized according to the application of customer,such as level gauge,level switch and level indicator.

Working principle: Working principle of radar level gauge: UHF electromagnetic waves are transmitted to the liquid level of the container under test through the cable or antenna. When the electromagnetic wave touches the liquid level and is reflected back, the instrument detects the time difference between the initial wave and the echo, thereby calculating the liquid level height. Select guided wave radar or airborne radar according to the dielectric constant and measurement length of the measured medium.

Application conditions, application conditions generally include calm liquid level, slightly fluctuating surface, turbulent surface, with stirring, with foam and so on. The more complex the conditions, the more interference echoes, and the smaller the actual measured range. In a complex environment, a precision radar with strong ability to deal with interference echoes or an antenna with a larger size should be selected.

KD-UZC-E type magnetic-sensitive electronic two-color level meter is made of high-quality stainless steel and imported electronic components. The display part adopts high-brightness LED two-color light-emitting tube, which forms a columnar display screen. The level of the measured liquid level is displayed through the red and green changes of the LED light column. High display brightness, long visual distance, clear ruler, large display Angle, adjustable brightness, the product is more visual, intelligent and other characteristics.

As one of the most professional magnetic level indicators manufacturers in China,Guangdong Kaidi Energy Technology Co., Ltd. provides customized solutions for a range of industrial automation process applications,such as mechanical float level indicator.We specialized in radar level gauge, fork type level switch,etc. These were implemented successfully, and KAIDI magnetic level gauge manufacturers products,such as radar level meter, magnetic level indicators, can be used in many different industries such as food & beverage, water, energy, pharmaceutical etc. Discover more information on https://www.kaidi86.com/.

Categories
Industry

Top rated EBS wax provider

Ethylene bis-stearamide provider by sainuowax.com? Sainuo is the leading polyethylene wax manufacturer and EBS wax supplier for PE wax, Ethylene bis-stearamide, etc. Polyethylene wax lubrication dispersant with an annual output of 30,000 tons, production scale of international production base, 60,000 tons of production and sales capacity. For quotation, TDS, samples request, please contact us. If there is anything you’re not sure about or you just need a hand getting set-up you can call or email us(polyethylene wax supplier). Find more details on https://www.sainuowax.com/nn-ethylene-bis-stearamide.html.

Its performance is comparable to the US Honeywell AC wax. It can improve the production efficiency of plastic processing, reduce the production cost, has good compatibility with polyolefin resin, etc. Oxidized PE wax has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, and can improve the appearance of finished products. Oxidised polyethylene wax can replace the products of Mengdan wax, Sichuan wax, liquid paraffin, microcrystalline paraffin, natural paraffin and polyethylene wax, etc, and its performance is comparable to that of the Honeywell A-C wax.

Stearoyl benzoyl methane is with the features of small smell, white color, high purity, product uniformity, stable for a long time, good weather resistance, no pollution. As a co-stabilizer of calcium / zinc hydroxy acid salt stabilization system, stearoyl benzoyl methane is used in the manufacture of mineral water bottles, oil drums, transparent sheets and transparent films; PVC heat stabilizer. This product is white powder, it is slippery, non-toxic, insoluble in water. It is used as a non-toxic heat stabilizer for polyvinyl chloride. It has low initial coloring property, good weather resistance, and excellent lubricity. It can be used as a lubricant, mold release agent, flat agent, etc. Discover additional details at sainuowax.com.

Color Masterbatch classification: Classification by resin carrier: PE masterbatch, PP masterbatch, ABS masterbatch, PVC masterbatch, EVA masterbatch, etc. Classification by molding process: injection molding masterbatch, film blowing masterbatch, spinning masterbatch, blow molding masterbatch, etc. Each variety can be divided into different grades. For example, ordinary film blowing color masterbatch is used for coloring general packaging bags and woven bags. High grade blown film color masterbatch is used for coloring coextrusion composite ultra-thin packaging film. Qingdao Sainuo Chemical Co.,Ltd. We are manufacturer for PE wax, PP wax, OPE wax, EVA wax, PEMA, EBS,Zinc/Calcium Stearate…. Our products have passed the REACH, ROHS, PAHS, FDA testing.

Influence of lubricant in PVC pipe in the formula of non plasticized PVC pipe, the addition of lubricant will not only affect the process conditions, but also directly affect the strength of the pipe. Too much lubricant is added, which reduces the discharge speed and destroys the normal operation. Proper selection of lubricant system can produce the best processing conditions and the best physical properties of products.

Categories
Industry

Best digital printed pouches factory

Premium digital printed pouches wholesale? What is stand up pouch with zipper packaging? Stand-up pouch, also known as Doypack (a trademark associated with the pouch), is a type of flexible packaging which is able to stand erect on its bottom for display, storage, and use. It is a type of plastic bag but sometimes also has plastic bottle characteristics. Discover even more details on pouch digital printing.

As a professional stand up pouch manufacturer, we have been exporting standup pouches since 2002 and is dedicated to fulfilling customer needs in providing them with effective flexible packaging solutions. It empowers our customers to deliver outstanding consumer experiences. We cooperate with small, medium, and famous global brands, or helping entrepreneurs build private label businesses on their Amazon on-line shop.

Can you print on Mylar bags? Printing on custom Mylar bags is very cost efficient and easy. … Inkjet printers in particular allow for an unparalleled ability to digitally print these custom bags. What Colour is Mylar? No actually Mylar is not silver, Mylar is translucent. Mylar can be coated with a metalized film to make it appear silver. Mylar films come in many colors including white, black, silver, gold. blue, clear, brown, and other custom colors.Supouches stand up pouch manufacturer constantly strives for innovation. Food packaging bags packaging has reliable quality, stable performance, good design, and great practicality.

What is the bottom of a pouch called? The bottom gusset is the additional material at the bottom of the bag which gives it its capacity for expansion. Stand up pouches can be made to meet your exact specifications, but typically the bottom gusset of the pouch is one of three different styles: Round Bottom Gusset, K-Seal Bottom, or Plow Bottom. What is flat bottom pouch? Flat Bottom Pouches have completely flat bottom and so they are known as “Flat Bottom Pouches”. These are also known as “Box Bottom Pouches, Block Bottom Bags or 8 Side Seal Pouches”. Flat bottom pouches are the premium packaging option of choice. What are pouches used for? A small bag often closing with a drawstring and used especially for carrying loose items in one’s pocket. The definition of a pouch is a small bag used for carrying things.

If it’s powdered coffee products – if the product has a large volume, a flat flour bag with plow bottom is recommended, to increase the stability of the bag, it is not easy to deform the bag and improve the satisfaction of user experience. If it is granular, and coffee beans are manufactured – you could choose either a flat flour bag or a stand up barrier pouches, more styles to choose from, only need to consider the volume size of the product, as well as the shelf life and permeability of oxygen. Therefore, when we produce each order, we will carefully and responsibly provide you with the best choice, to explore better market effect. See even more details on supouchbag.com.

Categories
Industry

High quality ethylene bis-stearamide manufacturer

Ethylene bis-stearamide powder provider in China? Sainuo is the leading polyethylene wax manufacturer and EBS wax supplier for PE wax, Ethylene bis-stearamide, etc. Polyethylene wax lubrication dispersant with an annual output of 30,000 tons, production scale of international production base, 60,000 tons of production and sales capacity. For quotation, TDS, samples request, please contact us. If there is anything you’re not sure about or you just need a hand getting set-up you can call or email us(polyethylene wax supplier). See extra details on ethylene bis-stearamide powder.

Its performance is comparable to the US Honeywell AC wax. It can improve the production efficiency of plastic processing, reduce the production cost, has good compatibility with polyolefin resin, etc. Oxidized PE wax has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, and can improve the appearance of finished products. Oxidised polyethylene wax can replace the products of Mengdan wax, Sichuan wax, liquid paraffin, microcrystalline paraffin, natural paraffin and polyethylene wax, etc, and its performance is comparable to that of the Honeywell A-C wax.

Stearoyl benzoyl methane is with the features of small smell, white color, high purity, product uniformity, stable for a long time, good weather resistance, no pollution. As a co-stabilizer of calcium / zinc hydroxy acid salt stabilization system, stearoyl benzoyl methane is used in the manufacture of mineral water bottles, oil drums, transparent sheets and transparent films; PVC heat stabilizer. This product is white powder, it is slippery, non-toxic, insoluble in water. It is used as a non-toxic heat stabilizer for polyvinyl chloride. It has low initial coloring property, good weather resistance, and excellent lubricity. It can be used as a lubricant, mold release agent, flat agent, etc. Discover extra info on https://www.sainuowax.com/.

Colorants are the main components of color masterbatch. They provide all the required colors and characteristics. Inorganic pigments: black and white pigments represented by titanium dioxide and carbon black; Iron oxide, metal oxide mixed crystal series, ultramarine, metal sulfide, etc; Organic pigments: azo series, phthalocyanine series, heterocyclic (fused ring) series, etc; Organic dyes: solvent dyes, disperse dyes (part), vat dyes (part); Effect pigments: Mica (pearlescent) pigment, copper gold powder, aluminum silver powder (slurry).

Function of Polyethylene wax as internal and external lubricant: As an internal lubricant, PE wax has good compatibility with polymers. It can reduce the cohesion between polymer molecules in the polymer, so as to improve the internal friction heat generation and melt fluidity of plastic melt. As an external lubricant, PE wax mainly improves the friction between polymer melt and hot metal surface of processing equipment It has poor compatibility with polymers and is easy to migrate from the melt to the outside, so it can form a lubricating thin layer at the interface between plastic melt and metal.

Categories
Industry

Power press machine provider in China

Premium bending press machine provider right now? Fast delivery standard machines stock for sale: Standard C frame single crank press and eccentric press are always some units stocking for sale. 2 weeks to 30 days lead time for customized order. Big press line such as car body parts stamping line could be ready for shipment within 4 months after order. Find extra information at https://www.pressmachine-world.com/power-press-machine. We can provide installation service for all the sold out machines at customer factory. Small machines can be shipped assembled and some big machines must be shipped disassembled. That is why we provide installation service to our customer.

Even if there are shelves full of molds, don’t assume that these molds are suitable for the newly purchased machine. The wear of each mold must be checked by measuring the length from the front end of the punch to the shoulder and the length between the shoulder of the female mold. For conventional ols, the deviation per foot should be about t0.001 inches, and the total length deviation should not be greater than t0.005 inches. As for the precision grinding mld, the accuracy per foot should be ±0.0004 inches, and the total accuracy should not be greater than ±0.002 inches. It is best to use fine grinding molds for CNC bending machines, and conventional molds for manual bending machines.

Hydraulic press brake machines are divided ito manual bending machines, hydraulic bending machines and CNC bending machines. Manual bending machines are divided into mechanical manual bending machines and electric manual bending machines. According to the synchronization method, hydraulic bending machines can be divided into: torsion axis synchronization, machine-hydraulic synchronization, and electro-hydraulic synchronization.According to the movement mode, hydraulic bending machine can be divided into up-moving typ and down-moving type.

When free bending is used, the bending radius is 0.156 times the opening distance of the die. During the free bending process, the opening distance of te die shoul b 8 tms te thickness of the metal material. For example, when using 1/2 inch (0.0127 m) open distance to form 16 gage mild see, the bendig adis o the par is about0.078 inches. I h bndig radius is almost as small as the material thickness, a bottomed die must be formed. However, the pressure required for forming a bottomed die is about 4 times greater than that of free bendingIf the bendig radius is less than the thickness of the material, a punch wit afrontend filet radus smaller than the thickess of the material must be used, and the imprint bending methoc must be used. In this way, 10 times the pressure of free bending is required.

The companies of the world machinery have already supported their customers with appropriate solutions for demanding tasks in the past. Thanks to the experience gained from many different projects in this area, the world machinery continuously optimizes their cometencis in termsofresidua srest, latnes lel and cu qualit of strips and sheets to meet the highest requiremens. In additon, speed and surface protection play an important role in machining and must be taken into account in all approaches to process improvement. An important prereqisite for these processes is a perfectly aligned. The world machinery has mad itit buines o react to these challenges and problems with the help of its decades of experience and to offer technologically mature solutions in the field of straightening and decoiling technology, strip feeding systems and automation. Find more information at https://www.pressmachine-world.com/.

Categories
Industry

Top rated bending press machine factory right now

Premium pneumatic press machine supplier right now? World has been committed to the development and production of power press machines since it was established in 1953. More than 100 experienced engineers are working in the three R&D centers, one in Shanghai, one in factory and another one in Ningbo. Find even more info on pneumatic press machine. We can provide installation service for all the sold out machines at customer factory. Small machines can be shipped assembled and some big machines must be shipped disassembled. That is why we provide installation service to our customer.

In order to choose the lowest onnage specifiction,itis best to plan for a bening radus larger than the thickness of the material, and use the free bending method as much as posible When the bending radius is large, it often does not affect the quality of the finished part and its future use. Bending accuracy requirements are a factor that needs to be carefully considered. It is this factor that determines the need to consider a CNC bending machine or a manual bending machine. If the bending accuracy is required to be ±1 and cannot be changed, the CNC machine must be focused.

Structures of hydraulic press brake machinesThe hydraulic press brake is an important equipment for the bending and forming of wokieces in the shet meta instry It functionis to press the telplate into parts of various shapes according to the process requirements. The frame is mainly composed of lf an right columns, wokbenches, and beams. Teleft and right oil cylinders are ied on th colms. The slider is connected with the pistons of th oil cylinders. The lower mold is tixed on the worktable. The upper punches are installed athe lower end of the slider. The hydraulic system provides power, and the electrical system gives instructions. Under the action of the oil cylinder, the slider drives the upper mold downwards and closes the lower mold to realize the folding of the sheet. The lett andrght columns, the workbench and the sliding block hereinafter refere to as h three major parts)are the key parts of the bending machne. The tl weighto te three major parts accounts for 70% to 80% of the total weight of a bending machine. Its strength and rigidit directy determine the operating accuracy, service life of the machine tool, and the ccuracy of the workpiece.

How to select a proper hydraulic press brake: Once an improper selection is made when purchasing a press brake, the production cost wl rise. And the bending machine cannot be expected to recover the cost. Therefore, here are several factors that must be considered in the decision-making process. The first important thing to consider is the parts you want to produce. The point is to buy a machine that can complete the processing task with the shortest workbench and the smalesttonnage.

World Precise Machinery (China) is the biggest branch factory of World Group which is focusing on producing and technology researching of power press machines. The original factory was built in 1953 to produce small eccentric punching machines for new China industry. World Group bought this factory in 1998 and expanded the production capacity and the product ranges. Now World can supply power press capacity from 6.3ton to 2500ton, C fame and H frame crank press, tie-rod and mono block type eccentric gear press, hydraulic shearing machine and bending machine (press brake), fiber laser cutting machine and the automatic accessories such as decoiler, straightening machine and roller NC feeder. See even more info on https://www.pressmachine-world.com/.

Categories
Industry

Biscuit production line manufacturer today

Biscuit making machine factory in China? The benefits of the automatic biscuit manufacturing plant are that it increases production efficiency by saving labor. With the industrial food machinery/biscuit factory machinery, your production capacity and product quality will be greatly improved. As a leading biscuit machines/food machinery supplier, we provide a wide range of biscuit systems & complete solutions for snack and cookie factory. With full biscuit product line & professional services, we receive much praise from customers globally. Welcome to contact us for further information like shipping, price on biscuit machinery. Read even more details on biscuit machinery. Golden Bake was founded by a biscuit line engineer and a biscuit master in 1999. With a vision to be the most completely automatic biscuit production line system supplier in this field, our team has been extending to 280 employees. Now Golden Bake is the top biscuit machinery manufacturer in China.

Self-cleaning filter device which can operate automatically; Assurance of environmental protection and sanitation in the working area. More importantly, it has agitating bin with weighing screw. It is Specially designed fast detachable bin without sanitary dead corner, ensuring food safety. Last but not least, there is an accurate,efficient and stable metering device. It Adopt microcomputer control screw discharging mechanism, Integrate control of machine, electricity, light, and SCM and has the function of automatic quantification and automatic adjustment of measurement errors.For the function of our auto-dosing system, they are as followings: Self-suction feeding;Dust free at negative pressure; Store and mix; Measurement of discharging; Saving of labor and effort; Automatic control. As a result, our auto-dosing system has Solve three major problems in sugar crushing in food Industry.First, High labor intensity. Secondly, Heavy dust pollution, Dirty, sticky, and disorderly, and difficult in dealing with hygiene.

At Golden bake,we prepared a tailored solutions for yout o automate the production and packaging of biscuits – our solutions include products for chocolate coating, paper-cup or tin loading for cookies, packing and cartoning solutions for biscuits, and tray loading tools too.Our solutions are designed to ensure that the products are prepared, wrapped and packed as efficiently and effectively as possible.And it will be the most suitable for your factory.

The sponge and dough are usually mixed on vertical spindle mixers.The yeast should be dispersed in water before feeding to the mixing bowl. The dough is mixed to the temperature of 30-35?, which is the optimum temperature for the action of the yeast.The sponge is fermented for specific time at the specific temperature(according to the biscuit). During this time the PH value of the dough will increase. After the fermentation of the sponge, the dough trough is taken bake to the mixing room.Times of the fermentation according to the type of biscuit.

Hybrid ovens consists of direct gas-fired heating(DGF), followed by convection heating toward the end of the baking process, contribute to produce a wide range of biscuit types. Different types of heat and moisture control can in fact have different effects on the final product. Adjustable hot wind convection baking oven (DFC & IFC) use of hot wind circulation to heart the oven,can improve the biscuit’s bloating and make sure the surface of biscuit uniform color,is the unearthly baking oven for baking salt and sweet fermented biscuit. Find additional information on https://www.foodsmachine.net/.

Categories
Industry

Best custom o ring provider

Excellent o rings manufacturer? DMS Custom Rubber Rings, O Ring Company & factory covers an area of more than 10,000 square meters and the factory area is 8,000 square meters. Our production equipment and test equipment are at the leading level in the industry. We are one of the largest companies in China specializing in the production and development of seals. We have long-term communication and cooperation with many universities and research institutions at home and abroad. Find more details on seals manufacturer.

The O-ring seal, which is also called shaft seal, is noted for a reasonable compression and stretch rate to achieve a good sealing effect. It will not leak when it is sealed statically. At the same time, the O-ring size is properly matched to the groove size. The structure is simple and its installation is very close to the machine. Its most prominent advantage is its self-sealing effect, eliminating the need for periodic adjustments. We guarantee that the size and mounting grooves of all our O-rings are standardized, so they are cost-effective and easy to maintain. They have low frictional resistance and are suitable for occasions where the pressure is often alternating.

Sealing performance over conventional O-rings is achieved by reducing particle generation, extending seal life and minimizing replacement time during preventive maintenance. Compared to traditional O-rings, this seal effectively reduces the number of dust particles generated during operation and extends the life of the machine with bonded seals installed. The seal has a working diameter range of 6.5 to 60.58mm.

Since the scraper seal is made of the special material, PTFE, it has an impurity immersion function. Therefore, when combined with the piston rod seal and the metal bushing, it can prevent damage to the piston rod and prevent the accumulation of oil pressure. It has a diameter range of 3-1600mm and a temperature range of -30°C + 200°C. The wiper scraper seal can operate at speeds of up to 5 m/s. It has high wear resistance, tear resistance, low-temperature resistance and good strength. Our wiper seals can be used in combination with piston seals and anti-wear rings to prevent oil in the cylinder from being mixed with foreign matter, which causes damage to the working seal. It is especially suitable for piston rods with a large diameter. Moreover, it has a wide range of applications, such as agricultural machinery, injection moulding machines, forklifts, cranes and so on.

Gasket sealing mechanism: The function of the gasket is caused by the blocking effect on the internal medium formed by the contact pressure of the sealing material on the joint surface and the elastic restoring force to the external tightening force. Classification and structure of gaskets: Gaskets are divided into three categories: non-metallic gaskets, non-metallic and metal combined gaskets and metal gaskets. The common materials are rubber, leather, asbestos board, cork, PTFE, tinplate, steel, aluminum, copper and stainless steel.

Because the system pressure is high, the temperature is high, and the wear is particularly serious, the seal is required to have good wear resistance. Low coefficient of friction: For construction machinery such as excavators and pump trucks, the hydraulic system pressure is high, the cylinder action speed is fast, and the wear of the seal is particularly serious. Therefore, the friction coefficient of the seal must be low, so that the seal has good wear resistance and suitable life.

DMS SEALS is a technology enterprise which specialized in the production of seals, the development of seals material and the solution of the sealing of special working condition. We own 120 staffs which including 70 middle and senior technicians. Our factory covers more than 10000 square meters which including 8000 square meters for the workshop. Our production equipment and test equipment are on leading level in the same industry. We are the one of the biggest enterprise who specialized in manufacturing and developing seals in China. We have long time cooperation and communication with many universities and research institutions at home and board. Find even more information at https://www.dmsseals.com/.

Categories
Industry

Nanocrystalline transformer core supplier right now

Top rated nanocrystalline cores manufacturer today? Transmart transformer manufacturers are an export oriented company with customers located in 40+ countries. We supply high quality tape wound cores in Nanocrystalline, Amorphous and Silicon Steels. Product applications including Common mode chokes ,Hall Effect Current Sensors, Low Voltage and Medium Voltage instrument transformers, Earth Leakage Circuit Breakers ,Reactors, Inductors etc. Read extra details at nanocrystalline toroidal core. Soft magnetic materials are those materials that are easily magnetised and demagnetised. They typically have intrinsic coercivity less than 1000 Am-1. They are used primarily to enhance and/or channel the flux produced by an electric current. The main parameter, often used as a figure of merit for soft magnetic materials, is the relative permeability (µr, where µr = B/ µoH), which is a measure of how readily the material responds to the applied magnetic field. The other main parameters of interest are the coercivity, the saturation magnetisation and the electrical conductivity.

As the iron core of the transformer, generally 0.35mm thick cold-rolled silicon steel sheet is selected. It is cut into long pieces according to the size of the required iron core, and then overlapped into “day” shape or “mouth” shape. In principle, in order to reduce eddy current, the thinner the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss and temperature rise, but also saves the material of silicon steel sheet. But in fact, when making silicon steel sheet iron core. Not only from the above favorable factors, because making the iron core in that way will greatly increase the working hours and reduce the effective section of the iron core. Therefore, when making transformer iron core with silicon steel sheet, we should start from the specific situation, weigh the advantages and disadvantages and choose the best size.

The common mode inductor using nanocrystalline core material can well suppress the peak voltage, protect sensitive components, and reduce the motor shaft voltage. Because of the unique characteristics of nanocrystalline core, it has been well used in some high-power system industries. Electric energy meter, power meter, ammeter, electric measuring equipment and other instrument fields. Various power current transformers in power transmission and distribution monitoring system. Leakage protection, relay protection, servo motor protection, fire monitoring, etc Current and voltage data sampling, etc.

Amorphous Core is preferred choice for transformers required low losses at high frequency. We have amorphous c-cores,amorphous ribbon cores,amorphous cut cores,amorphous core transformers . Please find out more about crgo core material. There are 50% and 80% nickel iron materials available, in which we manufactures Mumetal Toroidal core and Mumetal C-core, for the applications in high quality Current Transformers and power supplies industries. Read extra info at https://www.transmart.net/.

It is worth noting that Japan is vigorously developing FEMB amorphous alloy and nanocrystalline alloy. Its BS can reach 1.7 ~ 1.8T, and the loss is less than 50% of the existing FeSiB Amorphous Alloy. If it is used in power frequency electronic transformer, the working magnetic flux density can reach more than 1.5T, while the loss is only 10% ~ 15% of silicon steel power frequency transformer, it will be a more powerful competitor of silicon steel power frequency transformer. Japan is expected to successfully trial produce FEMB amorphous alloy power frequency transformer and put it into production in 2005.

Application field of nano magnetic core: Noise is the main circuit interference source in many power electronic devices. Various filter elements must be used to reduce noise. As the main component of differential mode inductance, magnetic particle core plays a key role in the filter. In order to obtain better filtering effect, the magnetic particle core material is required to have the following performance characteristics: high saturated magnetic induction, wide constant magnetic conductivity, good frequency characteristics, good AC / DC superposition characteristics and low loss characteristics. According to the above requirements, soft magnetic materials for inductance such as iron powder core, notched amorphous alloy core and iron nickel aluminum powder core (MPP powder core) have been developed successively. These materials have played their respective advantages and roles under different application conditions.