Blow molding manufacturer and supplier by china-plasticparts.com: Film blow molding: the molten plastic is extruded from the circular gap of the extruder head mouth die in a cylindrical thin tube, while the compressed air is blown into the thin tube cavity from the center hole of the head, the thin tube is blown into a larger diameter tubular film, and then rolled up after cooling. Hollow blow molding: With the help of gas pressure, the rubber type blank closed in the mold cavity is blown into a secondary molding technology of hollow products, is the production of hollow plastic products. The manufacturing methods of hollow blow molding are different, including extrusion blow molding, injection blow molding and stretch blow molding. See more information at mulan manufacturing group.
MULAN Company is a leading manufacturer of sheet metal parts in China, offering excellent quality and a wide range of products. With their commitment to delivering top-notch products, MULAN has established itself as a trusted name in the industry. From precision sheet metal production to comprehensive metal fabrication services, MULAN has something to offer for every need. In today’s fast-paced manufacturing industry, finding a reliable CNC machining parts supplier can be a daunting task. However, when it comes to sourcing high-quality CNC machining parts, Mulan Group is undeniably a global leader.
If your product quantity is relatively small, we can provide fast mold service, which is a fast turnaround and low price mode, but the disadvantage is that the quality of the mold is not good, and it is unable to undertake too many product manufacturing tasks. From the design of the mold to the final test of the mold, all the processes are carried out in our internal injection workshop and the mold workshop. We reserve a lot of material warehouses for manufacturing high-quality molds, which are in line with most plastic products, there are many spare parts in reserve, we can call for use at any time. The injection molding workshop is next to the mold workshop. After the mold is manufactured, the injection molding equipment can be installed and tested within a few hours. This is the key to rapid response.
Blow molding is a process in which a hollow product formed by the expansion of a hot-melt plastic tube closed in a mold by means of gas pressure. The blow molding process was used to produce LDPE vials in World War II. In the 1950s, with the birth of HDPE materials and the development of blow molding machines, the blow molding process was widely used and the technology was upgraded. According to the different plastic blank tubes, it can be divided into extrusion blow molding, injection blow molding, stretch blow molding and multi-layer blow molding. Compression molding process A manufacturing process for molding polymers such as thermosetting plastics, thermoplastics, elastomers, rubber and plastic materials, and natural rubber. For example: children’s pacifiers, sealing rubber rings, power insulation parts, electrical enclosures, etc.
Rotational molding can achieve very uniform wall thickness, and the corners will be thickened, which greatly enhances the strength and integrity of the product. Unlike blow molding, the corners will be pulled thin by pressure and cracked. , Affect the intensity. Rotational molding has also become rotomoulding. Rotational molding is a method in which thermoplastic plastics are rotated to form hollow plastic parts. The plastic raw material powder is added to the mold, and the mold is continuously rotated along two axes while heating. Under the action of gravity and thermal energy, the material presents a hollow plastic part with uniform wall thickness and complex structure.
Rigid plastic overmolding process: After the internal base material is made of rigid plastic injection molding, another type of steel plastic is wrapped around the base material through an overmolding mold. The color of the material can be customized, but the material compatibility limit should be consulted. Otherwise, cavities or cracks will occur. Rubber overmolding plastic: The internal base material is made of steel plastic. After molding, the rubber material or TPE material is wrapped on the surface of the base material. The product presents the softness of rubber and can play a role in wear resistance and non-slip, such as: toothbrush handles, electric tool handles, etc. Find extra details on https://www.china-plasticparts.com/.
We have 6 large-scale automated CNC rotational molding equipment, 7*24 hours for production tasks, to ensure that all products can be delivered to customers on time, and our production plan is not limited by the number, at least one piece can start our production plan. In order to better customize the rotomolding parts according to the customer’s design, we will perform secondary processing on the finished product to ensure the realization of the functional application of the product. like: In-mold inlay: Fix metal fasteners or other metal parts in the mold, used for fastener assembly between products, metal reinforcement ribs and other functions.
Place the thermoset plastic material in the compression molds cavity, melt the thermoset material by heating, close the mold with pressure, and the melted thermoset material will instantly fill the entire cavity under the action of pressure. In this process, it is very important to control the weight, shape, and specifications of solid materials, which will directly affect product quality. Thermosetting materials will reach the best curing state under the control of stable high pressure and high temperature. Compression molding parts are ejected, and the remaining materials are cleaned manually or by using cutting molds.