High quality Co2 laser cutting machine manufacturer? It is a laser cutting process, so do not forget to wear safety glasses. The laser beams are a kind of light, so do not put any reflective object besides your laser machine. Do the operation with caution. Put your object on the working stage, and point out the marking using the software. Check out if the laser gun is at the zero references or not. If your object is 20mm thick, put up your laser gun 20 mm above the zero references.
The total laser system consists of two major units. One of them is the controlling and energy power source unit, and the other one is the laser-shooting unit. Therefore, based on these units, we have categorized the working principle of CO2 laser engraver machine into following two steps: Laser beam creation – We know in the presence of high power energy source, the CO2, nitrogen, hydrogen, helium particles convert to the atomic excited stage. If these charged particles come to the original position, it produces photons. And subsequently, if the photons hit the other exciting particles, it provides so many photons. Two mirrors surround all of these particles and sources. One of them is fully mirror, and the other one has a small pore. Through this pore, the photons come out of the box and go to the laser shooting unit.
There are two common types of fiber laser marking: fiber laser engraver and fiber laser marker. As one of the professional fiber laser manufacturers, we provide excellent fiber laser machines including fiber laser engraving machine and fiber laser marking machine. Our fiber laser marking machine can mark metal materials, such as alloy, stainless steel, brass, aluminum, silver, steel, iron, and some non-metal materials, like ABS, PVE, Makrolon. Discover more information on fly laser marker.
There are numerous computer softwares to operate this machine. Install the required drivers for the device. And then draw your design on the software. Determine your required Power, speed, frequencies, and hatch. And practice it if you are a beginner. You can practice it using a metal plate to see if it works properly. There is some feature in the software that will help you to show the marking area before it operates. You can fix your red-bordered light on the object. However, Focal length is another essential thing to consider here. Usually, the zero points are marked on the scale. Let’s say we are working on the 150 x 150 mm. (Normally the more significant range is 200 x 200 mm). And we have 20mm height of the object to mark on it. What can be our focal length ??? well, we will need to move 20 mm upward to adjust the laser gun for the marking.
Laser is becoming a new method for most marking applications. Although it requires a higher initial investment than its alternatives, it provides a better return on investment. The satisfactory investment return is inseparable with the following benefits: In most cases, it’s the fastest marking solution. Looking at aluminum marking performances, it’s possible to create a high-contrast data matrix code in just 1.40 seconds. Laser marking is a traceability solution like no other. It offers near perfect readability rates, thanks to the high reliability of laser systems and to the high contrast of marked identifiers. It can also create marks that are truly permanent, capable of withstanding almost any surface treatment such as e-coating, heat treating. It can be used to create permanent marks on materials whose surface cannot be directly marked (like stainless steel) by creating a mark under the surface. Due to the high precision of laser marking, even very delicate graphics, 1-point fonts and very small geometries will become clearly discern. Meanwhile, marking with the laser ensures constant high-quality results. Laser marking is permanent and at the same time resistant to abrasion, heat and acids. Depending on the laser parameter settings, certain materials can also be marked without causing damages to the surface. Read more details on https://hispeedlaser.com/.