Best quality and affordable POR-15 rust preventive coating and rust remover online store today? POR-15 Rust Preventive Coating is a high performance coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
A special fiberglass reinforcing fabric that can be used with POR-15 Rust Preventive paint to bridge gaps and repair holes in sheet metal. Handling Instructions: Do not handle fabric with bare hands. Because it is a special type of fiberglass cloth, the fibers may pierce your skin and you will experience discomfort. Wear a pair of gloves (or other protection) whenever you handle this cloth. As you cut the cloth, some fibers may fly into the air, so be sure to wear the mask provided while cutting. Please note that there is one large piece of cloth in this envelope.
POR-15 Caliper Paint is formulated for high heat performance applications. When properly applied POR-15 Caliper Paint will provide a tough and attractive coating that will satisfy even the most demanding car enthusiast. POR-15 Caliper Paint has excellent coverage properties, 5 brilliant ceramic-like colors, and withstands temperatures up to 350°F. Also available in the POR-15 Caliper Painting Kit. The kit contains the proper preparation products and accessories for painting calipers. Great for do-it-yourselfers and first time users. See extra info on caliper paint.
Mask off the areas not to be painted. Tape off the brake bleeder screw, brake lines, and caliper piston boots and anything else you don’t want painted. Open the small can of POR-15 Rust Preventive Coating and stir, making sure the contents are thoroughly mixed. Using a foam brush (included in your kit) paint the caliper evenly, making sure the coating is evenly applied but not to the point where the paint runs. Because this is a rust preventive coating you want to be sure you don’t miss any spots which could rust later if not covered.
Rust is caused by moisture coming in contact with metal, which causes a chemical action called oxidation. All paints provide a measure of protection for a while, but since they are eventually softened and weakened by moisture, it is only a matter of time before moisture penetrates the painted surface and attacks the metal below. All of the so-called rust preventive paints on the market (except POR-15) are weakened by exposure to moisture. POR-15 is strengthened by exposure to moisture. Notice the hardness of the POR-15 coating. It doesn’t chip, crack, or peel like ordinary paints do, and its hardness will resist the wear and tear of every day life. Discover even more information at https://por15.com/.