Alloy rims wholesale manufacturer by Jjjwheel: Due to the current modification of the shops, the original thought that the hub installation of So easy if you do not pay attention to the following installation details, or out of the control: No diameter reducer is installed: the vehicle may have jitters problem during daily running. Dynamic balance weight does not return to zero: when the vehicle is running at high speed, it may shake. No torque plate is used to tighten the hub manually: too loose the hub may be in danger of falling off, too tight may damage the nut/bolt. Tire specifications do not match the hub: tire wear is abnormal, and even the hub can not be installed or there is a rub problem. See additional information at alloy wheels manufacturer.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
Cast aluminum wheels ultimately need to be processed by CNC machine tools, so no matter the roundness, end direction and radial accuracy of the wheels, they are not comparable to traditional rolled steel rings. The dimensional accuracy of the wheels directly affects the driving performance of the vehicle. Especially for high-speed vehicles, it is more prominent, such as the grip, yaw and stability of the whole vehicle during driving, and braking in case of an accident. The high speed and smooth driving of the car.
If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel. Discover more details at jjjwheel.com.