Magnetic track lighting factory today: To guarantee optimal results, you should hire a professional landscaper or installer to do the job for you. They will not only plan the most effective placement for your lights but will also be able to recommend different fixtures that are ideal for each of your needs. As a homeowner, you should never just assume that you’ll be able to install LED landscape lighting on your own (nor should you attempt it!). Hiring a professional will help you get the most out of your outdoor lights and ensure that they work properly for many years to come. If You Can’t See Them, They’re Not Any Good. Read even more details at cylinder downlight.
What is Magnetic Track Lighting, and how does it work? The magnetic track light is a kind of light fixture installed on the track by the magnet on the light fixture. The track is composed of an aluminum shell, copper conductor, and iron sheet. When the luminaire with magnet is close to the iron sheet in the track, the luminaire will be adsorbed on the trail without any tools, and at the same time the luminaire is in contact with the copper conductor, then powered by an AC110-220V to DC48V transformer for the whole track lighting system.
Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.
Smart flood lights: It is including motion sensor, photocell, time control floodlight fixtures, most of them can be turned on/off automatically through some special setup. RGB led flood light: This is color changing or special color such as green, blue, red, yellow types for special application. Solar powered led flood lights: It is the most energy-saving type of floodlight, and it powers the floodlight by converting solar energy into electrical energy. Very suitable for use in countries or regions with sufficient sunlight, such as Africa, the Philippines, Indonesia, Brazil and other places.
What is the cost of one solar street light? The cost of a solar street light can vary greatly depending on the type of light, the size, and the features included. Generally, a basic solar street light can cost anywhere from $50 to $500. How long do solar street lights Last? Solar street lights typically last for 3-5 years, depending on the quality of the product and the environment in which it is used. I believe everyone has noticed that some LED streetlights ( cobra head led street lights or modular street lights )on the street emit yellow light, and some emit white light. In our impression, LED street lights in cities generally emit warm yellow light. Street lamps are emitting white light. Why is this so? In fact, the difference between yellow light and white light lies in the choice of the color temperature of LED street lamps, so what color temperature should be used for LED street lamps? Next, LED street lamp manufacturer GRNLED will briefly talk about this issue with you.
GRNLED is a commercial Led floodlight manufacturer, supplier, and factory in China, We can accept OEM/ODM floodlights orders for commercial application. The color temperature can be single color such as 3000K Warm white, 4000K daylight, 6500k cold white, Green / Purple / Orange / Red / Blue, or to be RGB LED Floodlights. Widely applied for commercial outdoor places such as parking lots, backyards, schools, football fields, tennis court lighting, basketball lighting, etc. Fast Delivery: We provide a fast delivery service. mostly for normal led lights, it can be delivered within 3 days fastly. For big quantities, generally, it is 7-15days.
There are 3 types of magnetic tracks for the smart dimmable magnetic track light system: recessed magnetic track for embedded installation or trimless installation, surface mounted magnetic tracks for surface ceiling or wall mounted, and suspended installation with steel ropes. Black magnetic track, white magnetic tracks options. Each magnetic rail track can be cut off freely. The standard length for magnetic tracks is 1000mm, 2000mm, and 3000mm.
We are the best industrial Led Floodlight manufacturer, factory, and supplier in China. The following floodlight types’ light sources can be both SMD and COB-led chips. They are all at competitive prices and have stable quality. Most of them are with a high-quality constant current isolated driver, PF>0.9, surge protection up to 2KV-6KV, 2/3/5Years warranty. The materials adopt an aluminum heat body and toughed glass cover, Protection grade up to IP65 and IK08. Widely used as industrial lighting for construction sites, factories, and tunnels, or as outdoor landscape lighting for external walls, tree lighting.
Hybrid Solar Street Lights: Hybrid solar street lights are a combination of standalone and grid-connected solar street lights. They are powered by a solar panel and battery combination and are typically used in areas where grid power is available but unreliable. All-in-one street lights: It is also called integrated solar street lights, there are including a street light head, solar panel, solar controller, and Li-batter into a light fixture. It is easiest to do the installation.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Read extra details at grnled.com.
Always put customer value first. No cutting corners, no breaking promises. The manufacturing of LED lights is not only our work but also our career and life. Manufacturing and exporting LED lights including outdoor led lights like LED flood lights, LED street lights, UFO LED High bay lights, landscape lighting, and indoor LED lights like LED downlights, LED panel lights, LED track lights, magnetic LED lights, etc, most of the LED lights are CE RoHS Standard. For all of the orders, we can do customized designs for color boxes, print logos on the lamp body.